Skip to main content

E-Vehicle Acknowledgment FAQ

Updated 2026-08-31T12:27:18-0500


You registered an electric bike, scooter, or other e-vehicle, so we asked you to review a few safety pages first. This page explains what an e-vehicle is, why the review is part of registration, and what you are confirming when you complete it. Reviewing this information takes about a minute and helps keep you, your battery, and the people around you safe. Please note that the policies of your university and municipality supersede these FAQs.

I. The Basics

  1. What is an e-vehicle?

    An e-vehicle is any personal ride with an electric motor and a rechargeable battery. If your ride has a motor that helps propel it, it counts as an e-vehicle for registration.

    • Electric bikes (e-bikes), including pedal-assist and throttle models.
    • Electric scooters, mopeds, and skateboards.
    • Electric unicycles and hoverboards.
    • Conversion kits that add a motor and battery to a standard bike.

    A standard, human-powered bicycle with no motor or battery is not an e-vehicle. If you are unsure, choose “electric” during registration — it is better to over-report than to miss it.

  2. Why is an acknowledgement required?

    E-vehicles carry risks that standard bikes do not, and a short review is the simplest way to make sure every rider has seen the essentials. The two that matter most are the lithium-ion battery and the higher speeds a motor makes possible.

    • Lithium-ion batteries can overheat, catch fire, or fail if they are damaged, charged improperly, or not certified to a recognized safety standard.
    • Motor-assisted speed changes how you share paths, sidewalks, and roads with pedestrians and other riders.
    • Registering your e-vehicle also records its make and model, which helps recover it if it is lost or stolen.

    The acknowledgement is a one-time review shown when you register an electric vehicle. Once complete, you will not be asked again for the same vehicle.

II. Battery & Charging Safety

  1. How do I keep my battery safe?

    Most e-vehicle fires trace back to a damaged, uncertified, or improperly charged battery. A few habits prevent nearly all of them.

    • Buy certified. Choose vehicles and batteries certified to a recognized safety standard such as UL 2849 (e-bikes) or UL 2272 (scooters and boards).
    • Use the original charger. Charge only with the charger and battery that came with your vehicle, or a manufacturer-approved replacement. Mismatched chargers are a common cause of failure.
    • Inspect before you charge. Do not use or charge a battery that is swollen, punctured, leaking, giving off an odor, or unusually hot. Stop using it and contact the manufacturer.
    • Do not modify. Avoid aftermarket battery swaps, repairs, or de-restriction kits that were not made for your vehicle.
  2. Where and how should I charge?

    Charge where you can see it and where a rare failure would not trap you. Always follow your building rules.

    • Charge on a hard, non-flammable surface, away from beds, couches, exits, and doorways.
    • Stay nearby while charging and unplug once the battery is full. Do not charge overnight or while unattended.
    • Charge at room temperature. Let a battery cool down after a ride before charging, and do not charge a wet battery.
    • Follow your building's rules on where charging and storage are allowed. Many housing policies restrict indoor charging.

III. Riding Practices

  1. How should I ride responsibly?

    An e-vehicle reaches and holds higher speeds than most people expect, especially around people on foot. Ride so that others can predict what you will do.

    • Slow down near pedestrians, in crosswalks, and in crowded or shared spaces.
    • Yield to people on foot and give an audible signal before you pass.
    • Ride in permitted areas only. Follow posted speed limits and stay off routes closed to motorized vehicles.
    • Wear a helmet, use lights after dark, and avoid riding while distracted.
    • Park so you do not block doorways, ramps, walkways, or accessibility access.

IV. What You're Agreeing To

  1. What does completing the acknowledgement mean?

    By completing the acknowledgement, you confirm that you have read and understood the battery, charging, and riding safety information above. That is the whole of it.

    • You confirm you have reviewed the safety information on this page.
    • You confirm the details you entered about your vehicle are accurate to the best of your knowledge.

    The acknowledgement is an educational review, not a contract, permit, or proof of insurance. It does not transfer liability to you or to anyone else, and it does not replace any separate permit, license, or registration your campus or local laws may require. Check with your program administrator for any rules specific to where you ride.

  2. What happens to my information?

    Your registration records your vehicle so it can be identified and, if needed, recovered. Completing the acknowledgement simply notes that the safety review was shown and accepted.

    • Your make, model, and serial number are stored with your registration.
    • Questions about your specific vehicle or campus rules should go to your program administrator.