Stolen 2018-08-12T04:00:00-0500 from Edmonton, T6A 0V7, CA
It's a 20" wheeled BMX for flatland. The frame color is COPPER. The BikeIndex forms don't allow the information that corresponds to my bike to be inputted so I'll have to put it all here.. Frame: Copper Far East Cycles Turbo frame from 2017. Dropouts have been ground to 14mm from 3/8". Seatpost tube top has been grinded to get rid of the built in seatpost clamp and a beautiful small titanium seatpost clamp has been put in it's place. This clamp is made by RNC from tens of years ago, is natural titanium, and has a cast titanium bolt through it. The frame has a picture of my friend Dub's face on the seat tube on a sticker. There is also a tricklist on blue paper taped to the underside of the frame's downtube. Seat & Seatpost: the seatpost is a black Ares Tripod seatpost and the seat is KHE Watanabe black with a little bit of white smudge on the top maybe. The seat is bolted directly to the seatpost with one large titanium sprocket bolt in the front and two smaller countersunk titanium bolts in the back of the tripod. On the underside are two small washers and locknuts made of titanium and anodized blue - whereas the sprocket bolt holding the front of the seat to the seatpost is anodized blue but has not washer or locknut; it is threaded to the tripod seatpost. The bottom bracket is small Chinese style and has some thin titanium crank spacers throughout. The cranks are titanium KHE Hindenburgs; only one of 3 pairs ever made. Super light and strong and has some green painting and multicolored leftover. Should have some anodizing on the inside saying "LORD" on one of the arms. Cranks also have a hollow titanium spindle and hollow titanium bolts. The sprocket is a silver polished profile 18 tooth spline drive 3/32" The chain is 3/32" (narrow) with hollow pins, see picture. The front wheel has fire engine red Odyssey 7Ka rim, laced 3x to 36 rainbow titanium spokes and titanium spoke nipples. There is a black duck tape hub guard over the right side of the profile mini 14mm front hub with titanium axle. The valve has a red aluminum valve cap and presta tube, with odyssey frequency g tires 1.75" wide high pressure (140psi). The back wheel has a titanium 14mm far east freecoaster with 9 tooth driver, it has been ground to accept 3/32" (narrow) chains. The 36 spokes are natural titanium laced 3x to a black G-sport birdcage rim with titanium spoke nipples. The tires are both odyssey frequency-g 1.75" wide high pressure (140psi). The pegs are multi-colored IGI pegs with black plastic ends. The tubes are presta type with aluminum valve caps. The pedals are small black plastic IGI pedals with a small platform for pivoting, and have titanium axles in them. The handlebars are black and custom made (one in the world exist) and have a sticker on the front of the crossbar of a multi-colored or pink flower. The barends are strong plastic black Odyssey Parends and worn out some. The stem is an old newer version Brickhouse Bikes Formula One stem with total of 6 titanium bolts (4 on front plate (26mm reach) and 2 on back). The fork is a newer odyssey zero offset black fork with 14mm dropouts. THANK YOU!
Suspects broke into locked vehicle parked in front of my house and stole the custom BMX inside