stolen 2018 Vitus Sommet

The bike is easily identifiable, it is a one-of-a-kind, stripped-paint, medium 2018 Vitus Sommet bike. The blue pivot link in the middle has the original blue paint from when the bike had a blue/yellow finish. The front triangle has a noticeable dent on the bottom tube on the right side around the middle. There is no "Vitus" branding anywhere except on the black plastic bottom tube protector around the bottom bracket. The black fork has no decals because the lowers were replaced just before I had this stolen. If the frame was parted out, some suspension bearings are missing the seals. Parts include: Manitou Mattoc comp 160mm air fork with adjustable travel (140-160mm). Fork has red Absolute+ damper adjustment, blue rebound adjustment knob, and black air valve cap Nukeproof Neutron 31.8mm riser bar (≈735-755mm) Dimensions trail stem, black, 35mm length Shorex neon neon green lock-on grips with purple ODI bar ends Schwalbe Eddy Current front/rear tires 27.5"x2.8" with Slime sealant RockShox Super Deluxe rear shock with piggyback. No lockout but with rebound adjustment Shimano "Zee" BL-M640-B left brake lever for the front, Shimano Deore style rear brake lever on the right 203mm rotor on the front, 180mm rotor in the rear (both with 2-piston hydraulic calipers mounted on adapters) 15x110mm Boost Thru Axle on the front is silver, both the threaded cap and the axle itself. Boost 12x148mm boost Rear axle is black WTB TCS i29 27.5" 650b double walled Rims both mounted tubeless, gorilla tape rim strip, different tubeless valves for each rim (one is silver, and one is a black Bontrager Round Base TLR Valve Stem, neither valve has a cap), double butted spokes FSA tapered headset, one of the ball bearings is missing a ball FSA HOLLOWTECH II threaded silver bottom bracket with a cracked plastic cap on one side and a direction arrow sticker being stripped Novatec hubs loose rubber seal on the rear and damaged freehub body on the rear hub, 110mm x 15mm boost spacing on the front and 148mm x 12mm boost on the rear Carbon fiber stem spacers (one wider than the others) Specialized Targa Body Geometry Saddle OneUp Components V2 dropper seat post (31.6mm diameter) and is set at the max 210mm travel with no golden spacers under the shim where there would be pill-shaped spacers Microshift advent 11-46 9-speed black steel cassette Microshift advent 9-speed rear derailleur, clutch version, with the plastic clutch cover taken out to expose metal internals and on/off switch SLX - HOLLOWTECH II 2x 2-piece crankset with a bent 1x narrow-wide Shimano chainring (I believe 32t but possibly 30t) with one or several chainring threads stripped or on the verge of being stripped, non-driveside crank has plastic cap-screw Flat black plastic pedals with adjustable metal pins, some pins missing A 9 or 10 speed chain, probably a KMC X9 with KMC masterlink or possibly a black logoless masterlink from a Sram chain Topeak MODULA EX ADJUSTABLE BOTTLE CAGE with white bottom piece and black top piece, yellow plastic screw on the bottom. One of the bottle cage rivet threads on the frame is slightly stripped at an angle