2009 Specialized P.2 dirt jumper
Stock photo of a 2009 P.2 dirt jumper Color may not match!
- Serial
-
WUD81181422D - Manufacturer
- Specialized
- Name
- Specialized P.2 dirt jumper
- Model
- P.2 dirt jumper
- Year
- 2009
- Primary colors
- Silver, gray or bare metal
- Frame Material
- Aluminum
- Wheel diameter
- 26in
- Tire width
- Wide tire
- Distinguishing features
-
Specialized A1 Premium Aluminum, double-butted ORE DT, forged HT/ISCG BB/chainstay yoke/horizontal dropouts, integrated chain tensioner and axle carrier, multispeed hardware, disc only
Frame and fork
- Fork
- Marzocchi DJ2, 80mm, Cr-Mo steerer, 32mm alloy stanchions, 1pc. magnesium lower, cold forged alloy crown, RV damping w/ rebound adj., air assist "stiff" coil spring w/ preload adj., disc only
- Headset
- Tank FX, 1-1/8" threadless w/ hollow bolt
Wheels
- Front Rim
- Specialized/Alex P.Disc AM, double wall disc w/ eyelets, 36h
- Rear Rim
- Specialized/Alex P.Disc AM, double wall disc w/ eyelets, 36h
- Front Hub
- Specialized, forged alloy, high/low flange, 36h, nutted 3/8" axle
- Rear Hub
- Specialized Hi Lo, forged alloy, double sealed, ground race, cassette, nutted with 3/8" axle, 36h
- Spokes
- 2.0mm (14g) stainless
- Front Tire
- Specialized Rhythm Lite Control, 26x2.3", 60TPI, aramid bead
- Rear Tire
- Specialized Rhythm Lite Control, 26x2.3", 60TPI, aramid bead
- Front Tube
- Specialized schraeder valve
- Rear Tube
- Specialized schraeder valve
Drivetrain and brakes
- Cog/Cassette/Freewheel
- SRAM PG-830, 8-speed, 11-28t
- Front Brake
- Avid Juicy 3 SL hydraulic disc, alloy backed brake pads, adapter and dual-piston caliper w/ 160mm G2 Clean Sweep Rotor
- Rear Brake
- Avid Juicy 3 SL hydraulic disc, alloy backed brake pads, adapter and dual-piston caliper w/ 140mm G2 Clean Sweep Rotor
- Front Brake Lever
- Avid Juicy 3 SL
- Rear Brake Lever
- Avid Juicy 3 SL
- Rear Derailleur
- SRAM X-5, short cage
- Front Shifter
- SRAM X-4, 8-speed trigger
- Rear Shifter
- SRAM X-4, 8-speed trigger
- Chain
- KMC X8 w/ reuseable Missing Link
- Crankset
- Fuse tubular heat treated Cr-Mo 3pc.
- Chainrings
- 34A w/ poly bash guard and Specialized ISCG chain guide
- Bottom Bracket
- Fuse Euro, alloy cups, 4x cartridge bearing
Additional parts
- Stem
- Specialized aggro, 3D forged/CNC, 4-bolt, 35mm length
- Handlebar
- Specialized alloy riser bar, 31.8mm, 55mm rise, 680mm wide, 8 degree back sweep, 8 degree up
- Grips/Tape
- Fuse BMX, single compound, closed end, 140mm
- Saddle
- Specialized Fuse Lo Pro, 8mm rails, PVC bumpers front and rear
- Seatpost
- Specialized alloy two bolt, no offset, micro adjust, 30.9mm
- Seatpost Clamp
- Integrated w/ replaceable single bolt
- Other
- Chain stay protector, reflectors, owners manual